We experienced high winds in our service area today impacting the service of our customers. You can report an outage at ComEd.com/Report and check
outage status at ComEd.com/Map. For current storm information, visit our Storm page.
Trees and other vegetation cause about 13% of all electric service interruptions. Preventive pruning around aerial power lines is vital to providing reliable electric service.
Our vegetation management crews are trained in proper
arboricultural pruning techniques and take into account the species, growth
rate and location of the tree in relation to the overhead wires, as well as the
health of the tree, site conditions, and regulatory requirements before
beginning any trimming project.
Trimming trees near power lines is dangerous. ComEd’s contractors are specially trained to work in close proximity to electrical conductors. Please contact us when planning to do any tree trimming work near electrical conductors and we will advise you of options to work safely. Additional information is located on the Tree Trimming tab.
ComEd maintains two distinct types of electric rights-of-way. Electric transmission rights-of-way carry power from power generation stations to substations; electric distribution rights-of-way carry power from substations to customers.
ComEd performs routine tree and vegetation maintenance on regular cycles. These cycles are four years in length. ComEd also performs some mid-cycle work where trees are especially fast growing, or there are other problems that may result in interruptions to electric service.
Electric utility pruning is often perceived differently from other types of pruning, however the only real difference is the electrical hazard that is involved. When pruning trees in urban and suburban environments, the objectives, tools and methods used are similar to those used for electric utility pruning purposes. Likewise, utility arborists are expected to adhere to the same professional standards as other arborists.
ComEd employs professional contractors to perform its line clearance work. The work is performed in accordance with American National Standards Institute (ANSI) Standard A300, Part 1: Tree, Shrub, and Other Woody Plant Maintenance – Standard Practices, Pruning.
ComEd prunes plants and trees to provide safe and reliable energy. One term used for this practice is directional pruning. This method is designed to encourage the tree to grow away from the electric lines and has been adopted as a national standard (ANSI A300, Part 1) and by the International Society of Arboriculture as a Best Management Practice. Directional pruning allows ComEd to take characteristics of each tree into consideration when determining the extent of pruning needed. The pruning clearances to which we hold our contractors are based on the growth rate and mature size and shape of each tree, the location of the tree in relation to the power line, the type of utility facility, and a cycle length of 4 years.ComEd has been recognized for 14 years as a Tree Line USA utility by the Arbor Day Foundation for our sustained commitment to proper tree care and maintenance while continuing to meet service objectives. The requirements for the award include training workers in quality tree-care practices, educating the public about planting trees for energy conservation and helping customers to plant appropriate trees near utility lines.
CORRECT: Directional pruning guides the growth of the tree away from the wires.
INCORRECT: The "topping” or “rounding over” of trees can cause a flush of fast growing sprouts that grow directly back into the wires. Find out further information about how to avoid tree and utility conflicts by visiting the
International Society of Arboriculture's website. Additional information about reducing tree and utility conflicts is available on the
Arbor Day Foundation website.
Powering lives begins with a journey that transports high-voltage electricity from power generation stations to substations that “step down” the voltage to a level that can be distributed to your home. ComEd maintains more than 5,400 miles of high-voltage transmission lines that range from 69,000 volts to 765,000 volts.
Transmission rights-of-way (ROW) are typically identified by large steel poles or tower structures that are used to transport high-voltage electricity across large distances. ComEd owns or has express property rights to perform vegetation management in transmission ROWs in our service territory and we use a technique called integrated vegetation management to make sure that trees and other vegetation never cause an interruption to the system.
Federal standards mandate that utilities have a transmission vegetation management program to prevent outages on the transmission system. The North American Electric Reliability Corporation (NERC.com) strictly enforces these standards. Failure to meet a vegetation-related, zero-outage mandate can lead to fines of up to $1 million per day for a utility. The Federal Energy Regulatory Commission (FERC) has specific guidelines and requirements that electric utilities must meet. Visit the FERC website for more information.
ComEd does not allow tall-growing trees or vegetation on its electric transmission ROWs’ Wire Zones or Border Zones; and ComEd will not prune trees or vegetation to maintain their proper height. All such vegetation is removed.
Power outages on electric transmission lines can have far-reaching consequences, such as the loss of power to many thousands of customers, or even regional power blackouts affecting millions. In August 2003, more than 50 million people in the Midwest, Northeast and Ontario, Canada, were affected by a blackout that began when trees came in contact with transmission lines.
It is recommended that you contact ComEd before planting anything other than grass in an electric transmission right-of-way. ComEd encourages the establishment of native, low-growing prairie grasses and flowers in a ROW's Wire and Border Zones.
ComEd is working to maintain trees impacted by emerald ash borer beetles.
View Program Information (pdf).